Showing posts with label Analog Signal. Show all posts
Showing posts with label Analog Signal. Show all posts

Friday, January 2, 2015

Differences between Analog and Digital Signals

There are two types of signals that can carry information - analog and digital signals. They have been widely applied in people’s daily life. However, there are still some differences between them. First of all, the primary difference between analog and digital signals is that analog signals are continuous electrical signals which play recorded materials in their original form, whereas digital signals are non-continuous electrical signals generated by digital modulation which play materials in their re-sample forms. At the same time, this leads to the quality difference in analog and digital signals. Nonetheless, analog signals are limited to a larger degree because they are only capable of playing what has been recorded in the first place.

Digital signals take the original recording and turn it into the sample of numbers at certain intervals instead of using the original recordings. Afterwards, the number will be stored onto the digital device and then turned into a voltage wave, which enables people to produce more sophisticated recordings. Therefore, the majority of people would agree that digital signals are of much higher quality although they still prefer the more authentic and rough sound of a record being played.


Analog signals are also different from digital signals in terms of the quality loss over time. The quality of signals will be damaged a little each time video tapes and other analog devices are made use of to play these signals. On the other hand, the quality of signals won’t be damaged at all no matter how many times they are going to be played by digital music and video devices. The signal can always remain the same as the original one as long as the number can be read. This is a rather compelling advantage digital signals have over analog signals.

Thursday, January 1, 2015

Analog and Digital Signals

Two types of signal are able to carry information, namely, analog signal and digital signal. The difference between mainly lies in that analog signal is continuous while the digital signal is non-continuous.

An analog signal is continuous, which means that it won’t be broken or interrupted. For example, sound is an analog signal b y nature. One moment just follows another moment naturally without any interruption or breaking. For example, if you were to hum a descending note, then you may be able to detect the change of pitch, nut you can not point the particular moments when the pitch change.

In comparison, digital signals are non-continuous. Specific values are used to represent different information. To put make it easier for you to understand, here is an example. If you record a descending note you have hummed into a primitive digital signal, then you will get a collection of shorter sounds which makes up a single long sound.

Analog recording methods are continuous, which makes some people believe that such methods will be better choice in capturing sounds for digital recording methods may lead to the miss of some subtle nuances. However, as the digital recording process is developing at a rapid speed, digital recordings can achieve greater precision thanks to its higher sampling rates. Event though the signal is non-continuous, the captured sounds is still similar to the original ones because of the high sampling rate.


One of the drawbacks of analog format is that the analog recording is likely to wear down, which influence the sound quality greatly. On the other hand, digital media is able to capture sound indefinitely. As a result, audio engineers also convert analog waves into digital signals with digital recording devices or use special equipment to record directly to digital. Another advantage digital media has over analog is that you are free to copy the original sound as many time as you like without any damage.